445051222200

Anrik

1 offer available: $18.91
445051222200 ANRIK Wedge Anchor Zinc Fas445051222200 ANRIK Wedge Anchor Zinc Fas #2445051222200 ANRIK Wedge Anchor Zinc Fas #3

The ANRIK 445051222200 1/4 to 2-1/4 inch, 20 wedge anchor in zinc coating is a versatile and reliable fastening solution for various applications. This anchor is designed to provide secure and long-lasting hold in concrete, masonry, and other hard surfaces.

The product is available in a range of sizes, from 1/4 inch to 2-1/4 inches, making it suitable for a wide variety of projects. The 20-thread design ensures a strong and efficient anchor-concrete bond, while the zinc coating provides corrosion resistance, ensuring the anchor maintains its integrity even in harsh environments.

The wedge anchor is easy to install, requiring only a hammer drill and a suitable drill bit. The wedge design allows for easy expansion, ensuring a tight fit and a secure hold. The zinc coating also aids in easier installation, as it reduces the risk of the anchor seizing or sticking in the hole during installation.

The ANRIK 445051222200 1/4 to 2-1/4 inch, 20 wedge anchor is a high-quality, reliable, and durable solution for your anchoring needs. Whether you're installing signs, handrails, or other heavy loads, this anchor is a versatile and reliable choice. With its easy installation and corrosion-resistant coating, you can trust that this anchor will perform well and last for years to come.

Pros of buying Anrik 445051222200 1/4 2-1/4 20 wedge anchor zinc fas:

1. High Strength: This anchor is designed to withstand high loads, making it ideal for securing heavy objects to various surfaces.

2. Corrosion Resistant: The zinc coating on the anchor provides protection against corrosion, ensuring its longevity and durability.

3. Versatile: The 1/4 to 2-1/4 inch shank size and 20-inch length make it suitable for a wide range of applications, from light to heavy-duty projects.

4. Easy to Install: Wedge anchors are known for their ease of installation, requiring minimal tools and time.

Cons of buying Anrik 445051222200 1/4 2-1/4 20 wedge anchor zinc fas:

1. Limited Application: Due to its size and design, this anchor may not be suitable for all types of surfaces or projects that require a different type of anchor.

2. Potential Overkill: For lighter loads or smaller projects, a smaller and less expensive anchor might be more than sufficient.

Conclusion:

Anrik 445051222200 1/4 2-1/4 20 wedge anchor zinc fas is a reliable and high-quality anchor suitable for various heavy-duty applications. Its corrosion resistance and versatility make it a valuable addition to any toolbox. However, it may be overkill for lighter loads or smaller projects, and thus, the decision to purchase should be based on the specific requirements of the project at hand.

Recommendation:

If you are dealing with heavy loads and require a dependable anchor with excellent corrosion resistance, Anrik 445051222200 1/4 2-1/4 20 wedge anchor zinc fas is an excellent option. However, for lighter loads or smaller projects, consider opting for a more cost-effective alternative.

Details:

The concrete anchor is for heavy duty fastening applications where high pull out values in are needed. Our wedge anchor is made from high quality carbon steel, and zinc plated to prevent rust. The wedge anchor is ideal for structural anchorage, storage racking machinery and hand rails installation. It is for concrete only, not block or brick base material.

The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is a torque-controlled, expansion. Wedge anchor diameter: 1/4 length : 2-1/4 qty: 20 pieces. The concrete anchor is a torque-controlled, wedge expansion for heavy duty fastening applications where high pull out values in are needed.

The required installation torque of the anchor is 4 ft/lbs. Use a 1/4 drill bit to hole in the base material concrete only. Drill bit diameter/hole diameter is the same as anchor. Application, the Anrik wedge anchor is made from high quality carbon steel, and zinc plated.

Anrik 1/4 inch x 2-1/4 - 20 pieces wedge anchor zinc plated heavy duty fas:: fastener type wedge, number of items 20, color silver, brand Anrik, material carbon steel, size x 2-1/4, package dimensions 6.42 5.28 1.22 inches; 11.04 ounces, manufacturer Anrik.

specifications yofastener:

seller yofastener:

payments yofastener:

offer yofastener:

returns yofastener:

shipping yofastener:

general yofastener:

rating: 97.7% out of 100 based on 204 user ratings.